DGX / A100 / W200
DGX A100 壓縮機版改成 W200 水冷版DGX A100: compressor-cooled system converted to a W200 liquid-cooled build
從原機拆解、A100 水冷頭安裝，到 W200 機箱內的冷排、管路與整機配置，記錄這台設備的水冷改裝過程。A record of the conversion, from original system disassembly and A100 water block installation to radiators, tubing and assembly inside the W200 chassis.
8 張照片A100 → W200 水冷拆裝與測試紀錄
拆解與水冷改裝
07 PHOTOS點選照片可放大查看，並以方向鍵或左右滑動切換。Select a photo to enlarge it. Use the arrow keys or swipe to browse.
原機拆解・主機板、GPU 與散熱組件Original system disassembly: motherboard, GPUs and cooling components.
A100 GPU 模組與水冷頭安裝過程A100 GPU modules and water blocks during installation.
四組 A100 水冷頭安裝完成Four A100 water blocks installed on the GPU assembly.
W200 機箱內的 GPU 與水冷管路GPU assembly and liquid-cooling tubes inside the W200 chassis.
雙冷排與 GPU 水冷迴路配置Dual radiators and the GPU liquid-cooling loop.
主機板側・配線與水箱配置Motherboard-side layout, cabling and coolant reservoir.
W200 水冷整機外觀Overview of the W200 liquid-cooled system.負載測試畫面
01 PHOTO
照片為當時的 GPU 與 CPU 負載測試畫面紀錄。This image records the GPU and CPU load-test session.